http://slots.us.org
Showing posts with label welding machine. Show all posts
Showing posts with label welding machine. Show all posts

Monday, August 25, 2014

Arc Welding Fundamentals


Arc welding is one of several fusion processes for joining metals. By applying intense heat, metal at the joint between two parts is melted and caused to intermix - directly, or more commonly, with an intermediate molten filler metal. Upon cooling and solidification, a metallurgical bond is created. Since the joining is an intermixture of metals, the final weldment potentially has the same strength properties as the metal of the parts. This is in sharp contrast to non-fusion processes of joining (i.e. soldering, brazing etc.) in which the mechanical and physical properties of the base materials cannot be duplicated at the joint.

In arc welding, the intense heat needed to melt metal is produced by an electric arc. The arc is formed between the actual work and an electrode (stick or wire) that is manually or mechanically guided along the joint. The electrode can either be a rod with the purpose of simply carrying the current between the tip and the work. Or, it may be a specially prepared rod or wire that not only conducts the current but also melts and supplies filler metal to the joint. Most welding in the manufacture of steel products uses the second type of electrode.


Basic Welding Circuit
The basic arc-welding circuit is illustrated in Fig. 1. An AC or DC power source, fitted with whatever controls may be needed, is connected by a work cable to the workpiece and by a "hot" cable to an electrode holder of some type, which makes an electrical contact with the welding electrode.

An arc is created across the gap when the energized circuit and the electrode tip touches the workpiece and is withdrawn, yet still with in close contact.

The arc produces a temperature of about 6500ºF at the tip. This heat melts both the base metal and the electrode, producing a pool of molten metal sometimes called a "crater." The crater solidifies behind the electrode as it is moved along the joint. The result is a fusion bond.


Arc Shielding
However, joining metals requires more than moving an electrode along a joint. Metals at high temperatures tend to react chemically with elements in the air - oxygen and nitrogen. When metal in the molten pool comes into contact with air, oxides and nitrides form which destroy the strength and toughness of the weld joint. Therefore, many arc-welding processes provide some means of covering the arc and the molten pool with a protective shield of gas, vapor, or slag. This is called arc shielding. This shielding prevents or minimizes contact of the molten metal with air. Shielding also may improve the weld. An example is a granular flux, which actually adds deoxidizers to the weld

The shielding of the welding arc and molten pool with a Stick electrode. The extruded covering on the filler metal rod, provides a shielding gas at the point of contact while the slag protects the fresh weld from the air.


The arc itself is a very complex phenomenon. In-depth understanding of the physics of the arc is of little value to the welder, but some knowledge of its general characteristics can be useful.

Saturday, August 23, 2014

Volt-Ampere Characteristics of a Welding Power Source

Volt-Ampere Characteristics of a Welding Power Source

All welding power sources have two kinds of operating characteristics viz., static characteristic and dynamic characteristic. The static output characteristic can be easily established by measuring the steady-state output voltage and current by conventional method of loading by variable resistors. Thus, a curve showing the output current versus output voltage for a given power source constitutes its static characteristic.

The dynamic characteristic of an arc welding power source is determined by recording the transient variations occurring over a short intervals in the welding current and the arc voltage. Thus, it describes instantaneous variations occurring over a short interval of time say a millisecond. Arc stability is determined by the combined interaction of the static and dynamic colt ampere (V-I) characteristics of the welding machine power source.

Friday, August 22, 2014

Arc Welding Machine Power Source

For striking a welding arc it is essential to have the desired current in the welding circuit. Depending upon the type of current required (ac or dc) it may be obtained from the following sources.


  • A welding machine or frequency changer (for ac welding machine).
  • A dc generator of a welding rectifier (for dc welding).
  • The no load or open circuit voltage (OCV) should be high enough to strike an arc, but not so high as to endanger the welding operator, for example, for a 2000A transformer the OCV should not be over 90 volts through for lower currents of say upto 600A OCV may be upto 100 volts.
  • With direct current, the OCV must be at least 30 to 35 volts while with alternating current it should not be lower than 50 to 55 volts. An open welding arc can be sustained at 18 to 40 volts.
  • The minimum voltage for arc ignition is 25 volts which must be attained within 0.05 second for the maintenance of a stable arc.